Now works with alexa →

CEPOWER BMS Monitor

Professional Battery Monitoring for Real Energy Systems

Built for Real Energy Systems

CEPOWER is a complete monitoring platform for JK-BMS and JBD/Overkill–based battery systems. It is designed for users who need continuous, permanent visibility — not temporary Bluetooth scans or limited manufacturer apps.

Whether you operate a single DIY battery, install systems for clients, or manage batteries at scale, CEPOWER provides a unified way to monitor, analyze, and react in real time.

The system uses an ESP32 gateway that connects to the JK-BMS via UART or Bluetooth, and to the JBD/Overkill BMS via Bluetooth, then exposes the data locally or remotely over Wi-Fi, making the battery accessible anytime — not only when you stand next to it.

CEPOWER mobile app monitoring battery

New Communication Options

CEPOWER supports both UART and Bluetooth (BLE) communication for JK-BMS, and Bluetooth (BLE) for JBD/Overkill BMS.

For JK-BMS installations, UART provides a more stable direct connection and is the recommended method where supported. JBD/Overkill BMS currently connects via Bluetooth only.

What CEPOWER Monitors

  • Live battery monitoring for total voltage, current, power, state of charge (SoC), remaining capacity, cycle count, runtime, and temperatures.
  • Per-cell voltage tracking with automatic min/max cell detection, voltage imbalance monitoring, and protection state visibility.
  • Charge and discharge activity, live direction of energy flow, and time-to-full or time-to-empty estimation based on real operating conditions.
  • Historical records with charts, zoom tools, and export for analysis and reporting.
  • Multi-battery visibility with support for individual battery view or combined total system view.

Why CEPOWER Exists

Most BMS setups depend on temporary Bluetooth access and manufacturer apps that stop being useful once the phone disconnects or the user leaves the battery room.

CEPOWER replaces that limitation with a dedicated monitoring gateway that keeps collecting, organizing, and presenting battery data continuously.

  • No need to stay physically near the battery
  • Continuous data collection at regular intervals
  • Remote access from local network or internet connection
  • Actionable alerts instead of manual checking
  • Better visibility for DIY users, installers, and multi-site deployments

Multi-Battery & Multi-Client Ready

CEPOWER is designed for both single-battery users and professional deployments with multiple batteries, multiple sites, or multiple clients.

Batteries can be monitored individually, grouped into a combined system view, and managed without mixing access, history, or device identity.

  • Single battery and multi-battery support
  • Combined system visibility for larger installations
  • Separate monitoring for different clients or locations
  • Clear device-based structure for organized fleet management

Automation & Alerts

CEPOWER includes a flexible rule-based notification and automation system. Rules can be triggered by battery conditions, thresholds, and operating states.

  • Low or high state of charge
  • Voltage or cell imbalance
  • Charge and discharge anomalies
  • Temperature warnings and protection events
  • One-time, daily, or continuous alerts
  • Smart automation with eWeLink devices such as Sonoff

Automation rules can be used to react automatically to battery behavior instead of only sending notifications.

  • Turn connected devices on or off based on battery thresholds
  • Protect loads or reserve energy based on low SoC conditions
  • Trigger actions for charging, discharging, or abnormal battery states
  • Build simple or advanced battery-driven automation scenarios

Diagnostics & Analysis

CEPOWER goes beyond live monitoring by providing diagnostic tools and calculation pages that help users understand battery condition, performance, and long-term trends.

  • State of Health diagnostics and calculation pages
  • Trend analysis based on voltage, current, temperature, and imbalance history
  • Cell-level health visibility for deeper battery assessment
  • Historical charts and export tools for review and reporting
  • Actionable battery insights for maintenance and decision-making

No Accounts. No Lock-In.

CEPOWER does not require user registration or cloud accounts. Access is based entirely on a Device ID.

This makes the system simple, secure, and suitable for private or offline-first environments.

App Screenshots

Battery overview screen Notification automation screen Detailed battery information

ESP32 Hardware Requirements

CEPOWER JKBMS Monitor supports communication between the JK-BMS and the ESP32 through either UART or Bluetooth. Bluetooth is no longer mandatory.

✔ UART → recommended for the most stable direct connection between JK-BMS and ESP32
✔ Bluetooth (BLE / Classic) → supported as an alternative communication method
✔ Wi-Fi → required for live monitoring, remote features, notifications, and firmware updates

CEPOWER does not rely on high CPU speed, large RAM, or PSRAM. All supported ESP32 variants run CEPOWER at the same performance level. Bigger memory or newer chips do not make CEPOWER faster or more accurate.

ESP32 WROOM-32
ESP32 with external antenna

✅ ESP32 Modules That DO Work with CEPOWER

CEPOWER can communicate with the JK-BMS through UART or Bluetooth, depending on the hardware setup and firmware mode. For most users, we recommend the normal ESP32-WROOM-32 or ESP32-WROVER-E. They cost less, work fine, and provide everything CEPOWER needs.

Newer ESP32 families such as ESP32-C3 and ESP32-C6 do not improve CEPOWER monitoring performance for normal use. They should only be considered when there is a specific reason to use them.

ESP32 Module / Board Chip Family Network JK-BMS Communication Status
ESP32-WROOM-32 ESP32 (Classic) ✅ Wi-Fi ✅ UART + Bluetooth Tested & Recommended
ESP32-WROVER-E ESP32 (Classic) ✅ Wi-Fi ✅ UART + Bluetooth Tested & Recommended
ESP32-DevKitC ESP32 (Classic) ✅ Wi-Fi ✅ UART + Bluetooth Works
ESP32-WROOM-32E / 32U ESP32 (Classic) ✅ Wi-Fi ✅ UART + Bluetooth With Antenna, Tested & Recommended
ESP32-S3-WROOM-1 / 2 ESP32-S3 ✅ Wi-Fi ✅ UART + Bluetooth Not supported in standard firmware — choose ESP32-WROOM-32 or ESP32-WROVER-E
ESP32-C3 (all variants) ESP32-C3 ✅ Wi-Fi ✅ UART + Bluetooth Not recommended for normal use — choose ESP32-WROOM-32 or ESP32-WROVER-E

❌ ESP32 Variants That DO NOT Work with CEPOWER

The ESP32 variants below are not compatible for the currently supported CEPOWER configurations shown here due to missing network or communication features. Compatibility depends on the selected CEPOWER communication mode and hardware design.

ESP32 Variant Network JK-BMS Communication Why it does NOT work
ESP32-S2 ✅ Wi-Fi ⚠️ UART only May be usable only in specific UART-based CEPOWER builds; not part of the currently tested supported list
ESP8266 ✅ Wi-Fi ❌ Not supported Not an ESP32 platform and not supported by CEPOWER firmware
ESP32-C6 ✅ Wi-Fi 6 ⚠️ Different firmware framework required Not supported by current CEPOWER firmware because ESP32-C6 is not part of the classic ESP32 family used by our standard Arduino-based build. Use ESP32-WROOM-32 or ESP32-WROVER-E instead.
ESP32-H2 ❌ No Wi-Fi ✅ BLE / UART potential No supported network connection for CEPOWER operation
ESP32-P4 ❌ No Wi-Fi ⚠️ Depends on design Does not match the currently supported CEPOWER hardware profile shown here
ESP32-Solo-1 ✅ Wi-Fi ⚠️ UART only May be usable only in specific UART-based CEPOWER builds; not part of the currently tested supported list
Bottom line:
CEPOWER supports JK-BMS and JBD/OVERKILL communication through UART or Bluetooth. For supported installations, UART is recommended for better stability and is currently supported for JK-BMS only.. Wi-Fi is currently required for CEPOWER network features.
Important note:
Some ESP32 variants without Bluetooth may still be usable in future or in specific UART-based CEPOWER builds. The tables above reflect the currently tested and recommended CEPOWER hardware profile.

🎉 Try CEPOWER Free — No Credit Card Required

Monitor your JK-BMS or JBD/Overkill battery right now — completely free. No registration. No payment. Just real battery monitoring.

✅ What's Included in Free Mode

  • Real-time monitoring — voltage, current, power, SoC, cell voltages
  • Local network access — monitor from any device on your Wi-Fi
  • Live data updates — see your battery status instantly
  • No time limits — use it forever, completely free

How Free Mode Works

In Free Mode, you connect directly to your ESP32 gateway over your local network. Your phone or computer talks to the ESP32, which talks to your JK-BMS or JBD/Overkill BMS via Bluetooth or UART.

No cloud. No accounts. No subscriptions. Just you and your battery.

Ready to Start?

Follow our step-by-step guide to set up free monitoring in minutes.

Want More? Upgrade Anytime

When you're ready for remote access, historical data, and smart alerts, you can upgrade to the full CEPOWER platform.

  • Monitor from anywhere in the world
  • 15-day history with charts and export
  • Automatic alerts for voltage, SoC, and imbalance
  • Automation with eWeLink devices like Sonoff
  • State of Health diagnostics and calculation pages
  • Access to support and assistance

Start Free Trial

Questions?

Do I need to pay later?
No. Free mode works forever. You only pay if you want remote access and history.

What hardware do I need?
Any ESP32 module with Wi-Fi and Bluetooth. See our Requirements page.

Is my data private?
Yes. In Free Mode, data stays on your local network. Nothing goes to the cloud.

🚀 Free Mode Setup Guide

Follow these steps to start monitoring your JK OR JBD/OVERKILL BMS battery for free. Check off each step as you complete it!

⏱️ Estimated Time: 30-45 minutes for first-time setup
📱 Tools Required: Computer with USB port, Android phone (for MAC address scanning), Wi-Fi router access
Setup Progress
0/11 Complete

Step 1: Get ESP32 Hardware

Purchase one ESP32 module for each battery pack. Any basic ESP32 with Wi-Fi and Bluetooth will work.

Step 2: Download Firmware File

Download the latest CEPOWER firmware that will be installed on your ESP32.

📥 Download Latest Firmware
⚠️ Important: Save the firmware file in an easy-to-find location (like Downloads or Desktop). You'll need to select this file in Step 6.

Step 3: Download & Install Uploader Tool

This tool will flash the firmware to your ESP32 and configure it.

🪟 Download Uploader (.exe)

Step 4: Download CEPOWER Mobile App

Install the monitoring app on your smartphone.

Step 5: Download Windows Monitor (Optional)

For big-screen monitoring or if you have multiple batteries. You can skip this if you only want mobile monitoring.

🖥️ Download Windows Monitor

Step 6: Find Your BMS MAC Address

📱 JK-BMS UPDATE: Recently, JKBMS company made the MAC address available in its latest application update. You can now find it under the BMS number when you open the app, or printed on the BMS itself. If your BMS is older, you might need to use the nRF method below.
📦 JBD/Overkill BMS: Some JBD/Overkill units have the MAC address printed on the product label or on the box. Check there first. If it is not printed anywhere, you will need to scan for it manually using the nRF Connect method described below.

Each BMS has a unique MAC address (JK-BMS and JBD/Overkill). Check your label, box, or app first — if it's not listed anywhere, use an Android phone to scan for it.

Step 7: Connect ESP32 & Install Drivers

Connect your ESP32 to your computer and install necessary drivers.

Step 8: Upload Firmware to ESP32

Flash the CEPOWER firmware onto your ESP32 module.

Step 9: Configure MAC Address (CRITICAL)

Tell the ESP32 which JK-BMS to connect to. This step must be done with 100% accuracy.

Step 10: Send Wi-Fi Credentials to ESP32

Configure your Wi-Fi network on the ESP32 so it can connect to the internet.

Step 11: Set Fixed IP & Remote Access (Optional)

For stable local monitoring, set a fixed IP. For remote access from outside your home, configure DDNS and port forwarding.

🎉

Final Step: Configure CEPOWER App

Add your battery to the CEPOWER mobile or PC app and start monitoring!

Need Help?

If you encounter any issues during setup, we're here to help!

📧 Email: support@cepower.org
💾 Save the log file from the uploader screen and send it to us for faster support

💎 CEPOWER Pricing

Choose the plan that fits your needs — from free local monitoring to enterprise-scale deployments.

For Individual Users

Free

$0

Forever • Direct Connection

  • ✅ Auto-updates every 10s
  • ✅ Real-time monitoring
  • ✅ Live cell voltages & SoC
  • ✅ Unlimited batteries
  • ✅ Local network access
  • ✅ Direct ESP32 connection
  • ✅ Automatic firmware updates
  • ❌ No remote access
  • ❌ No history
  • ❌ No alert notifications
  • ❌ No automation

Cloud

$10
per year
  • ✅ Everything in Free, plus:
  • ✅ Remote access anywhere
  • ✅ Stable connection, no drops
  • ✅ 15-day history with charts and export
  • ✅ Automatic alert notifications
  • ✅ Automation with eWeLink devices like Sonoff
  • ✅ State of Health diagnostics and calculation pages
  • ✅ Combine multiple batteries
  • ✅ Data export (CSV)
  • ✅ Access to support and assistance
Get Started Start Free Trial

For Business & Professional Use

Installer

Minimum 10 batteries · Bulk pricing

  • ✅ Everything in Cloud, plus:
  • ✅ Personal installer dashboard
  • ✅ Monitor all your client installations
  • ✅ Instant alerts before clients call you
  • ✅ Remote diagnostics — fewer site visits
  • ✅ Username & password login
  • ✅ Client system overview & separation
  • ✅ Mobile deployment tools
Batteries 1 Year 5 Years
10 batteries $36/yr $129/5yr Buy
15 batteries $49/yr $179/5yr Buy
20 batteries $59/yr $229/5yr Buy
Need more than 20 batteries? Contact us — we'll send you a custom quote.

Business

Fleet Management

Custom pricing

  • ✅ Everything in Installer, plus:
  • ✅ Add & track new batteries
  • ✅ Battery lifecycle tracking
  • ✅ Movement & location logs
  • ✅ Transaction history
  • ✅ Create & manage installers
  • ✅ Support team authorization
  • ✅ Complete state logs
  • ✅ Like CARFAX for batteries
Contact Sales

Enterprise

White-Label

Dedicated infrastructure

  • ✅ Everything in Business, plus:
  • ✅ Your own branded apps
  • ✅ Custom app logo & name
  • ✅ Dedicated server platform
  • ✅ Private infrastructure
  • ✅ Custom API integration
  • ✅ Enterprise SLA
  • ✅ Priority support
  • ✅ Custom features
Contact Sales

Questions About Pricing?

Volume discounts available for installers and battery companies.
We offer flexible plans tailored to your business needs.

📧 Contact us at support@cepower.org

📥 Downloads

Get all the tools you need to monitor your JK-BMS and JBD/Overkill batteries with CEPOWER.

📱 Mobile Apps (Android & iOS)

Monitor your batteries anywhere with live data, history, alerts, and firmware updates.

Download on the App Store Get it on Google Play

Direct APK: cepowerapp.apk

🔵 ESP32 Firmware (JK BLE)

For ESP32 modules communicating with JK-BMS via Bluetooth.
Required to run CEPOWER on your JK-BMS system.

Version: Loading...
Firmware is ready for Free Mode. For Trial/Paid, replace the Device ID on the ESP32 with your licensed code.

Download Firmware (.bin)

🟢 ESP32 Firmware (JK UART)

For ESP32 modules communicating with JK-BMS via UART (direct cable connection).
Recommended for the most stable connection.

Version: Loading...
Firmware is ready for Free Mode. For Trial/Paid, replace the Device ID on the ESP32 with your licensed code.

Download Firmware (.bin)

🔋 ESP32 Firmware (JBD BLE)

Use this firmware if your ESP32 connects to the JBD-BMS via Bluetooth.

Version: Loading...
Firmware is ready for Free Mode. For Trial/Paid, replace the Device ID on the ESP32 with your licensed code.

Download Firmware (.bin)

🪟 Windows Monitor

Same features as the mobile app, designed for Windows PC — ideal for control rooms and workstations.

Download Installer (.exe) Download ZIP

⚙️ ESP32 Firmware Uploader

The all-in-one setup and diagnostic tool for your BMS gateway — flash firmware, configure Wi-Fi, check signal quality, and diagnose connection issues, all from one Windows app.

Download Installer (.exe) Download ZIP
Which one do I need?
✔ Monitor only → Mobile App or Windows Monitor
✔ New installation → Firmware Uploader + App
✔ Installer / Technician → All tools

🔌 Integrations

Connect CEPOWER with your favorite voice assistants and smart home platforms.

alexa

Works with Alexa

Voice control your battery monitoring

LIVE

Ask Alexa about your battery status anytime — no phone needed. CEPOWER integrates with Amazon Alexa so you can monitor your battery with your voice.

🎤 Voice Commands

Alexa recognizes CEPOWER by these voice names — use whichever feels natural:

"Sea Power" "C Power" "CEPower"

💡 Just say "Sea Power" — that's it

Simply saying "Alexa, Sea Power" gives you an instant full battery report — state of charge, voltage, and estimated runtime. Even if you have multiple batteries, Alexa gives you a complete picture in one command. No tapping, no phone needed.

"Alexa, Sea Power"
"Alexa, Sea Power battery"
"Alexa, ask Sea Power how is my battery"
"Alexa, ask Sea Power battery status"
"Alexa, ask C Power how is my battery"

🔋 Multiple Batteries — One Command

Have more than one battery? No problem. Just say "Alexa, Sea Power" and Alexa reports the status of all your batteries in a single response.

💡 The beauty of a connected battery bank

When you have multiple batteries connected together as a bank, they all share the same state of charge, the same voltage, and the same estimated runtime — because they operate as one unified system.

This means one voice command gives you precise, accurate data for your entire battery system — no guessing, no checking multiple screens, no picking up your phone.

Whether you're in the garden, the kitchen, or another room entirely — just ask Alexa. Your battery system answers instantly, with real numbers, at any time of day or night.

⚡ State of charge (SoC) — how full the battery bank is
🔌 Voltage — current battery bank voltage
⏱️ Estimated runtime — how long the bank will last at current usage

💬 Example Alexa Responses

"Your battery is charging at 98%, with 55 volts. It will be fully charged in 1 hour and 20 minutes."
"Your battery is discharging at 72%, with 52 volts. It will last approximately 4 hours and 30 minutes."
"Your battery is fully charged at 55 volts."
"Warning! Your battery is critically low at 15%. Please connect to a power source soon."

What You Need

  • A CEPOWER battery device with an active internet connection
  • An Amazon account — free to create at amazon.com
  • An Alexa-enabled device — Echo speaker, Echo Dot, Echo Show, or the Alexa app on your phone
💡 Have an Echo speaker? You don't need a phone app. Just enable the CEPower skill once using the link below or via voice, and you're done.

Setup Guide

Step 1 — Create your CEPOWER Alexa account

Go to connect.cepower.org/register.php, enter your email and choose a password, then tap "Create Account".

Step 2 — Add your battery

After logging in, enter your Device ID and give it a name like "Garage Battery", then tap "+ Add".

Step 3 — Enable the CEPower skill

Use the direct link below — works from any browser, phone, or computer. No need to search.

Open CEPower Skill on Amazon →

Then click "Enable to Use" and log in with your CEPOWER Alexa account from Step 1.

Have an Echo speaker? Once the skill is enabled via the link above, your Echo is ready — no phone app needed.

✅ You're all set!

Say "Alexa, ask Sea Power how is my battery" and Alexa will respond with your live battery status.

Open CE Power Skill on Amazon

Can't find the skill by searching? Use this direct link to open it instantly.

⚡ Alexa Routines — Smart Battery Automation COMING SOON

Combine CEPOWER battery alerts with Alexa Routines to automate your smart home based on real battery conditions. When your battery reaches a threshold, Alexa can automatically trigger any connected device — Tuya, smart plugs, lights, switches, and more.

How It Works

🔋 Battery condition
CEPOWER alert
→
🔔 Alexa Routine
triggered
→
🏠 Smart device
turns on/off

Real-World Routine Examples

🟢 Battery reaches 90% — Turn off charger

When CEPOWER detects SoC at 90%, Alexa triggers a routine that turns off your Tuya or smart plug connected to the charger — protecting battery health by avoiding overcharge.

🔴 Battery drops to 20% — Turn off heavy loads

When battery is critically low, Alexa automatically turns off non-essential devices — air conditioners, water heaters, or any Tuya/smart plug controlled load — to extend runtime and protect the battery.

⚡ Battery fully charged — Announce it

When battery hits 100%, Alexa announces through your Echo speaker: "Your battery is fully charged." No more checking manually — Alexa tells you.

🌡️ Low SoC at night — Turn on backup power

Schedule a nighttime routine — if battery drops below 30% after midnight, Alexa activates a connected generator switch or backup power source automatically.

🔌 Battery healthy — Turn on irrigation or appliances

When battery is above 70% and solar is generating, Alexa turns on garden irrigation, washing machines, or other high-consumption devices — making the most of available energy.

How to set up a Routine: Open the Alexa app → tap More → Routines → + → set the trigger as a CEPOWER alert notification → choose your action (control a Tuya device, smart plug, announcement, or any connected device). Works with Tuya, eWeLink, TP-Link Kasa, Philips Hue, and any Alexa-compatible smart home device.

Troubleshooting

Alexa says "Battery status is not available"
Your session may have expired. Go to More → Skills & Games → Your Skills → CEPower → Disable Skill, then re-enable and log in again.

Alexa does not understand "Sea Power"
Try saying "C Power" slowly and clearly. You can also type the command in the Alexa app under More → Activity.

Cannot find the CE Power skill
Search for "CEPower" in the Alexa app. The skill is available on amazon.com with Alexa app set to English (US). Or open it directly: amazon.com/dp/B0GYNMRL49

DIY Battery Monitoring — Start Free, Upgrade When Ready

CEPOWER is built for DIY battery enthusiasts who want complete visibility and peace of mind. Start with free local monitoring, then unlock professional features for less than the cost of a sandwich per year.

✅ Free Mode

Perfect for testing and local monitoring

  • ✅ Real-time monitoring
  • ✅ Local network access
  • ✅ Auto-updates every 10s
  • ✅ Unlimited batteries
  • ✅ Automatic firmware updates
  • ❌ No remote access
  • ❌ No history
  • ❌ No alert notifications
  • ❌ No automation
BEST VALUE

🚀 Cloud Mode

Less than a sandwich per year, per battery

  • ✅ Everything in Free, plus:
  • ✅ Rock-solid connection
  • ✅ Monitor from anywhere
  • ✅ 15-day history with charts and export
  • ✅ Automatic alert notifications
  • ✅ Automation with eWeLink devices like Sonoff
  • ✅ State of Health diagnostics and calculation pages
  • ✅ Combine multiple batteries
  • ✅ Access to support and assistance
Start 60-Day Free Trial

Why Cloud Mode Changes Everything

🔔 Alerts & Automation That Save You Money

Imagine receiving alert notifications or triggering automation actions before something goes wrong. No more manual battery checking, delayed reactions, or wondering what happened overnight.

Real-World Alert & Automation Examples:

  • "Battery reached 100%" — Receive an alert notification or trigger an automation action
  • "Battery dropped to 15%" — Protect loads or reserve energy before you lose power
  • "Cell voltage imbalance detected" — Catch problems early before they damage your battery
  • "Temperature dropped below 10°C" — Protect your battery in winter and avoid unsafe charging conditions
  • "High current detected" — Know when something is drawing unexpected power
  • "Low SoC detected" — Turn a connected eWeLink or Sonoff device on or off automatically

💡 Real savings: One alert notification about a failing cell could save you hundreds of dollars in battery replacement costs. One automation rule or temperature warning could help prevent permanent damage and unnecessary energy loss.

📊 15-Day History — See What Really Happened

Ever wake up to a dead battery and wonder "What happened during the night?"
Or notice something unusual and want charts, export, and deeper diagnostics to understand whether the problem is new or part of a longer trend?

What You Can Discover:

  • Overnight behavior — See exactly what your battery did while you slept
  • Power consumption patterns — Zoom in on specific periods and understand what changed
  • Cell balance trends — Track which cells are drifting and catch problems before they become serious
  • Temperature patterns — Understand how weather and usage affect battery performance
  • Charge/discharge cycles — See your actual usage patterns over time
  • State of Health diagnostics — Review battery condition using calculation pages and deeper analysis
  • Exportable history — Use charts and export tools for reporting, review, and troubleshooting
📈 Diagnostics & Analysis: State of Health diagnostics, calculation pages, per-cell analysis, historical charts, and export tools help you understand battery condition and maximize battery lifespan.

🌐 Rock-Solid Connection vs. Free Mode

❌ Free Mode Connection

  • ⚠️ Local network only
  • ⚠️ Requires manual network setup
  • ⚠️ No remote access
  • ⚠️ No history or export
  • ⚠️ No alert notifications or automation

✅ Cloud Mode Connection

  • ✅ Stable remote access from anywhere
  • ✅ 15-day history with charts and export
  • ✅ Automatic alert notifications
  • ✅ Automation with eWeLink devices like Sonoff
  • ✅ State of Health diagnostics and calculation pages
  • ✅ Accurate battery combining

Cloud Mode adds much more than remote access. It gives you stable monitoring, historical charts, export tools, alert notifications, automation, diagnostics, and a more complete view of your battery system wherever you are.

💰 Let's Talk About Cost

You spent hundreds or thousands of dollars on your battery system. You want it to last and perform well.

Cloud monitoring costs less than a sandwich per year, per battery.

What you get in return:

  • Peace of mind — Know your battery is monitored even when you're away
  • Early problem detection — Use alert notifications to react before issues become expensive
  • Better battery protection — Use automation and diagnostics to reduce stress and improve care
  • Time saved — No more manual checking or guesswork
  • Better decisions — Use charts, export, and diagnostics to understand real battery behavior

Try Cloud Mode Free for 60 Days

Experience the difference. No credit card required.

🚀 Start Your Free Trial Now

Setup takes 10 minutes. Cancel anytime. No strings attached.

CEPOWER for Installers & Technicians

Professional battery monitoring built for installers, integrators, and energy service providers.

Built on DIY Power — Designed for Business

CEPOWER for installers includes everything from the DIY platform, plus professional tools to manage, monitor, and support multiple client systems efficiently.

Centralized Client Dashboard

✔ All client battery systems in one secure dashboard.

✔ Instant overview of online, offline, and alert states.

Example: Manage 30+ homes without visiting sites.

Remote Diagnostics

✔ View live & historical battery data remotely.

✔ Detect issues before customers notice them.

Example: Identify cell imbalance before failure.

Client Isolation & Privacy

✔ Each client sees only their own batteries.

✔ Installer retains global visibility.

Ownership & Handover

✔ Install, configure, then hand over ownership.

✔ Optional installer supervision retained.

Why Installers Choose CEPOWER

  • Reduce emergency service calls
  • Fix issues remotely before site visits
  • Professional reporting & analytics
  • Clear separation between clients
  • Scales from 10 to thousands of batteries
Installer Eligibility

Installer accounts start with a minimum purchase of 10 Device IDs.
This unlocks professional dashboards, multi-client management, and priority business features.

Grow Your Installation Business with Confidence

Less troubleshooting. Fewer site visits. Happier clients.

Contact Us to Become an Installer Partner

Battery Companies & Energy Brands

Enterprise-grade battery monitoring across the full product lifecycle — from deployment to warranty and end-of-life.

Full Lifecycle Visibility — At Scale

CEPOWER enables battery manufacturers and energy brands to monitor, analyze, and support battery fleets deployed across thousands of locations, installers, and customers — all from a single unified platform.

Lifecycle Tracking

✔ Track batteries from factory deployment to end-of-life.

✔ Maintain full historical records per device.

Example: Know exactly when, where, and how a battery has been operating since first activation.

Warranty Monitoring

✔ Monitor batteries under warranty conditions.

✔ Detect misuse, abnormal stress, or early degradation.

Example: Validate warranty claims using real operational data instead of assumptions.

Location Awareness

✔ View last known operational location.

✔ Detect unauthorized relocation of batteries.

Example: Identify batteries moved between sites or regions without authorization.

Installer & Support Assignment

✔ Assign installers and support teams per device.

✔ Clear responsibility and escalation paths.

Example: Regional installers see only the devices they manage.

Enterprise Intelligence & Fleet Control

Remote Parameter Management

✔ Modify any BMS parameter remotely from headquarters or support base.

✔ No site visits required for configuration changes.

Example: Adjust charge limits, protection thresholds, or cell settings across your entire fleet without dispatching a technician — saving fuel, time, and operational costs.

Usage Analytics

✔ Analyze real-world battery usage patterns.

✔ Improve future product designs.

Fleet-Wide Diagnostics

✔ Detect trends across thousands of batteries.

✔ Identify systemic issues early.

Enterprise Reporting

✔ Export reports for engineering, warranty, and management.

✔ Data-driven decisions at scale.

Designed for Scale:

CEPOWER Enterprise is built for battery manufacturers, energy brands, and large operators managing hundreds to millions of deployed batteries, with strict data isolation, auditability, and long-term reliability.

Enterprise Battery Intelligence Starts Here

Reduce warranty costs. Improve product reliability. Gain real-world insight across your entire battery fleet.

Contact Us for Enterprise Solutions

Enterprise & Turnkey Deployments

A fully branded, end-to-end battery monitoring platform — built and operated for your company.

Your Own Platform. Your Brand. Your Infrastructure.

CEPOWER Enterprise is a full turnkey solution for battery manufacturers, energy brands, utilities, and large operators who want their own monitoring platform — under their name, logo, and business model.

Dedicated Infrastructure

✔ Private servers or cloud infrastructure.

✔ Fully isolated environment per enterprise.

Example: A dedicated backend running exclusively for your brand and customers.

White-Label Mobile & Web Applications

✔ Custom mobile apps with your logo and colors.

✔ Branded web dashboards for customers and staff.

Example: Your own app on Google Play & App Store — powered by CEPOWER.

Custom Dashboards & Workflows

✔ Role-based dashboards (customers, installers, support).

✔ Workflows adapted to your operations.

Example: Different views for sales, support, and engineering teams.

API & System Integration

✔ Secure APIs for data access.

✔ Integration with ERP, CRM, billing, and analytics systems.

Example: Battery data synchronized with your internal platforms.

Enterprise-Grade Operations & Support

Scalable Architecture

✔ Designed for thousands to millions of batteries.

✔ High-availability and long-term reliability.

Enterprise SLA & Support

✔ Defined uptime and response guarantees.

✔ Priority support and direct technical contact.

Security & Data Ownership

✔ Full data isolation per enterprise.

✔ You own your data and customer relationships.

Turnkey Enterprise Solution:

CEPOWER Enterprise delivers a complete platform — infrastructure, backend, dashboards, and branded applications — deployed and operated as a ready-to-use system tailored specifically to your company.

Build Your Branded Battery Platform

From infrastructure to applications — we deliver the full solution.

Contact Us for Enterprise Solutions